Product not for sale anymore. Recommended product:
Jackery Solar Generator 1000 Plus
Large capacity supports 93% of device
Jackery Explorer 1000 Pro can support 93% of your daily used appliances, from mobile phones to refrigerators, and even pumps; this solar charging power station can easily cover them all. The Explorer 1000 Pro delivers immense solar power - from RV trips to home emergency back up.
Blender (300W)
2.5 HSpace Heater (350W)
2.5 HElectrlc wheelchair (380W)
2.5 HIce Maker (700W)
1.2 HCoffee Maker (550W)
1.5 HToaster (650W)
1.3 HMicrowave (700W)
1.2 HKettle (850W)
1 HElectric rice cooker (820W)
1 HRunning Time Simulator
To power with Explorer 1000 Pro
(1002Wh Capacity)
Please enter the wattage of the appliance
(not exceeding 1000W)
3 simple ways to charge quickly
3 simple ways to charge quickly
Up to 10 Years battery life
All-round safety protection
Less to Carry, More to Explore
Explorer 1000 Pro weighs only 11.5 kg, which is approximately 70% of the weight and size compared to alternatives with the same capacity. Equipped with an ergonomic design handle, you can easily carry it whilst camping, fishing, and for outdoor work. Further, it can work at a temperature range of 14-104 ℉ (-10-40℃) preparing you extremely well for all outdoor exploration.
Additionally, the exceptional new Smart Screen, means you can easily find the remaining capacity charging status, and other information on the LCD panel. It can be set to open for 12 hours to prevent no-loading so that you can save more power.
Sturdy Beyond Imagination
Go green in a quiet way
5 Years Guarantee
Please read this manual carefully before using the product, particularly the relevant precautions to ensure proper use.
A: The Explorer 1000 Pro uses a ternary lithium battery.
A: It is rated for 1000 full charge cycles, at that point you will have approximately 80% of your original capacity, and will gradually reduce from there.
A: We recommend that you keep the battery power above 20% when using or storing the power station daily.A fully charged battery can last for several months, please recharge it every 3 months to keep the battery power above 50% when not in use.
A: If your screen shows "F3," it means the Battery Management System (BMS) has automatically locked the battery to prevent excessive discharge and potential damage. Due to shipping regulations, our products are typically shipped with around 20% battery, and some power may naturally deplete during storage and transportation.
Try the following reset method:
1. **How to Reset:** While the screen is on, press and hold both the **Display** and **USB** buttons for 10 seconds. Once the screen displays “8,” the reset is successful.
2. **After Resetting:** Charge the device for at least 10 minutes. It should return to normal operation, so there's no need to worry.
If the issue persists after resetting, please take a photo of the successful reset screen and another showing the error code still appearing. Send these images to us via email hello.aus@jackery.com, and our technical team will review them and provide further assistance. We apologize for any inconvenience caused.
A: Sorry currently, the product doesn't support the APP connection, however we will look to find another solution, in the future.
A: Yes, the Explorer 1000 Pro has an internal MPPT controller.
A: The noise does not exceed 46 dB within 1 meter.
A: Yes, the Explorer 1000 Pro fully supports pass-through charging, with no adverse effects to the battery.
A: How do you switch on low power consumption? Press the AC switch button + DISPLAY simultaneously. If it doesn't switch on, the system will automatically shut down after 12 hours of no-load, or low power consumption.
How do you turn off low power consumption? Press the AC switch key + DISPLAY for 1 second.
A: Yes, please refer to the following technical details:
USBA and USBC port: ≤2W, automatic shutdown after 12H
AC port≤18 W (inverter), automatic shutdown after 12H
car charger port≤2W 12H, automatic shutdown after 12H
A: Yes - the Explorer 1000 Pro can be considered as the fully updated version of the Explorer 1000.
A: The E500 does not feature an updated version currently - so please stay tuned and follow our Official Website, social media accounts, or fully subscribe to our email newsletter for future updates.
A: The Jackery power station Explorer 1000 Pro can run devices at 110V, requiring less than 1000W. If this does not exceed the output power of the Explorer's AC port, it can be supported by The Explorer.
Calculate the charging time by using the following formul
Working time = Explorer's watt-hours * 0.85/operating power of your device.
A: It can be fully charged with the AC charger in 2 hours using fast charging.
One car charger can fully charge the Explorer 1000 Pro in 12 hours, with 2 car chargers in 6 hours.
And it can be fully charged with 800W solar panels in 1.8 hours (time differs depending on sunlight intensity, angle and temperature).
If you have any other inquiries, please feel free to inform Jackery's Customer Service Team.
A: Here are all of the certifications of the product: UN38.3/Quality Inspection GB31241/ICES-003/TSCA/California 65/CEC/DOE/Nrcanbattery: GB31241-2014/UL1642/RoHS/REACH/UN38.3
A: Please refer to the size and weight as of below:
13.64KG (including UN certified box)/39.5*31.5*43.5cm (including UN certified box)
The product itself is approximately 11.5Kg/length 34 x width 26 x height 25.55cm
A: The packaging contents includes: 1* AC Cable, 1* Car Charger Cable, 2 *8mm Adapters (transfer DC7909 to DC8020), 1*User Manual.
A: Yes , however DC takes priority.
A: Yes - it will shorten the charging time by up to half the time.
A: Yes, the two DC inputs are independent and it will not affect each other.
A: Please plug the cable directly into the Explorer 1000 Pro.
A: Please plug the 2 units of 80W solar panels directly into the 2 DC input ports.
A: The solar panel 80W comes with a reflective carrying case. It features double-sided power generation through the reflective optical fiber, and reflective angle can be adjusted, through the sticking position of the magic tape of the carrying case.
A: The Explorer 1000 Pro is unfortunately not waterproof. Please make sure you keep away from the rain.
A: The Explorer 1000 Pro uses the highest 94V-0 fireproof material required by UL in the United States.
A: The Explorer 1000 Pro has an internal adapter - please plug the cable into it to recharge directly.
A: Apologies a PD cable does not come with the product - please purchase separately
A: The AC cable and DC car charging cable is 2 meters long, with 80W solar panel coming with a 2-meter extension cable that transfers the DC8020 to DC7909.
A: Could you please provide me with your order number and current shipping address? Jackery offers a free cable on all official orders.
A: Thank you for choosing Jackery and reaching out to us.
You can use the car charger, and AC cable of E2000 Pro AC cable to recharge the Explorer 1000 Pro, however strictly do not use the AC cable of the Explorer 1000 Pro to recharge the E2000 Pro, or this will cause battery damage.
If you have any other inquiries, please contact Jackery's Customer Service Team.
A: Thank you for choosing Jackery and reaching out to us.
We strongly do not recommend using other solar panel brands to recharge Jackery power station products.
Since we can not guarantee other brand quality and provide an after-sale service - for instance if becoming damaged using other company's solar panel brands.
If you have any other inquiries, please contact Jackery's Customer Service Team.